VISIT OUR UNIT IN DELHI
H-143, First Floor, Guru Nanak Market, Lal Kuan, Mehrauli – Badarpur Road, New Delhi – 110044, INDIA
Mob: +91-8929045224
Email: aretepowertech@gmail.comFREQUENTLY ASKED QUESTIONS
Since the earthing system works underground, a lot of environmental factors come into play to decide the life of the earthing system. They include
- Soil conditions
- Moisture content
- Climate changes
- Soil resistivity
- Types of soil (normal, sandy, semi-rocky, rocky etc.)
- Acidity levels of the soil
- Basic maintenance schedule
Apart from the above, it is very crucial that the installation of the earthing system is done as per specifications, non-adherence will not only drastically reduce service life of the system but also hinder earth resistance results
Our earthing systems have proven over the last decade that a circular cross-section is the best-suited design for equal & fast dissipation of current through the electrode and into the earth. We carried out developmental work on the plate–in–pipe design earlier, but dropped it as it was inefficient and prone to long-term problems.
In that case, we suggest you have the earthing tested. The traditional earthing methods have been plagued with corrosion and low conductivity problems for decades. The conventional earthing system methods have a very short service life. They become ineffective and are as good as no earthing at all.
Unfortunately, our electrical ecosystem is not perfect. It is constantly attacked by high voltages, fault currents, surges, short circuits & lightning all of which can turn deadly. So, any structure which has electricity running through it needs earthing for the protection of property and life.
Yes, you can install earth electrode without backfill compound. As you are aware that earth resistance value depends on soil characteristics which vary from place to place with seasonal variation, the earth pit without backfill compounds may exhibit different resistance value at different places in different soil conditions.
To overcome these problems, use of mixture coal and salts are recommended by different national and international standards. The salts and moisture present in the earth pits reduce the soil resistivity and coal that absorbs and retain the moisture around the earth pipe, thus helps in maintaining low earth resistance value. Similarly, we also recommend and suggest the use of Back Fill Compounds inside the earth pit, instead of the conventional mixture of salt & coal as the use of Back Fill Compounds reduces the possibility of fast corrosion of earth pipe.
The Back Fill Compounds which is a mixture of eco-friendly minerals reduces the rate of corrosion of the earth electrodes.
The BFCs suggested by us has all the requisite quality that an ideal backfill compound should have. Nevertheless, you as per your requirement and understanding, are free to use any suitable backfill compounds that are available in the market in different name.